R-410A Transition Ready
New units use R-454B or R-32 coolant. We stock and work with both. We can swap your old R-410A unit to a new one without delay.
Heat Pump Swap — Cameron Park, CA
Heat Pump Replacement Cameron Park
Older heat pumps ran on R-410A coolant. That coolant is being phased down. If your unit is aging, now is the time to think about a swap to a new unit with a modern coolant.
Why Alex's Cleaning Service?
Book nowWhole-home cleaningDeep cleans, move-ins, move-outs, and upkeep.
3-4 person crewA professional team comes to each visit.
490+ reviews (4.9★ on Google)4.9 average rating across public profiles.
Tucson AreaRoutes from Oro Valley to Vail, Sahuarita, and nearby.
Heat Pump Swap in Cameron Park
Fresh Air has swapped 900+ units since 2009. We are a family-run shop. We hold CSLB #945361 and pull El Dorado County permits on every job. The R-410A coolant phase-down means old units cost more to service each year. A new unit uses R-454B or R-32, runs more efficiently, and comes with a fresh warranty. Our free in-home visit tells you whether repair or swap makes more sense.
Family-Run Since 2009
Fresh Air is family-run and has served the Sacramento Valley for over 15 years. We hold CSLB #945361 and are fully insured.
Free In-Home Visit
We check your old unit and tell you honestly whether a swap beats a repair. The visit is free.
What Heat Pump Swap Includes in Cameron Park
- Free in-home visit to decide if swap beats repair for your unit.
- Safe removal of the old heat pump unit and coolant lines.
- New outdoor heat pump unit set on a level pad.
- New indoor air handler set and connected.
- New coolant line set charged to spec for the new coolant type.
- Electrical work and thermostat wiring.
- Duct check and seal.
- El Dorado County permit pull and inspection.
When to Swap Your Heat Pump in Cameron Park
Heat pumps last 12 to 15 years on average. If your unit is in that range and needs a big repair, a swap often costs less over five years. R-410A service coolant is still legal but the supply is shrinking and prices are going up. A new unit avoids that cost entirely and brings better savings.
Full system swap costs in Cameron Park run $8,000 to $15,000. The price varies by unit size, savings rating, and duct shape. PG&E may offer rebates on qualifying new heat pump units in El Dorado County. Check current amounts at pge.com. We give you a firm price after the free in-home visit. Most swaps are done in about 48 hours from permit pull to startup.
Heat Pump Replacement Cameron Park FAQ
Is R-410A still available in Cameron Park?
Yes, R-410A service coolant is still available. But new unit production with R-410A stopped in early 2025. New units use R-454B or R-32. If your old unit needs more coolant often, a swap to a new unit is the better long-term move.
When is a heat pump swap better than a repair in Cameron Park?
If the unit is 12 or more years old and the repair costs over half the price of a new one, a swap usually wins. We check this at the free visit.
How long does a heat pump swap take in Cameron Park?
Most swaps are done in about 48 hours from permit pull to startup. The physical work runs about one full day. We file the El Dorado County permit.
Get a Free Heat Pump Swap Estimate in Cameron Park
Call Fresh Air at (916) 416-8181 or book at /contact/. We serve Cameron Park, El Dorado Hills, Shingle Springs, and the greater Sacramento Valley. The estimate is free.